Thank you for choosing DECOCODE photo murals for decoration.
DECOCODE means not only hundreds of bright images for your interior, but also the modern production technologies according to the European quality standards.Important!
Ensure that the walls have an even color before hanging the photomurals. Avoid draughts while hanging and drying the photomurals.
Before hanging or cutting the murals, ensure that all canvases are in good condition, without any visible faults. Check the image matching of all parts before hanging. Please, keep the label until the work is finished.
Carefully prepare the wall before hanging. Remove any old wallpaper or paint from the wall. If necessary, spackle and smooth out any holes or rough areas on the wall, apply primer.
Mark a vertical line on the wall surface using a plumb. Mark also the joining areas when hanging the image of several canvases.
Apply the paste evenly to the wall to an area slightly wider than the width of the canvas. Wait for 2 minutes and then start hanging the murals.
Apply the canvas to the wall tightly in accordance with the lines you marked before. Smooth out the wallpaper from top to bottom using a rubber roller of plastic spatula. Ensure that there are no air bubbles left under the canvas.
When hanging an image of several canvases, apply parts one by one matching the picture to the previous part. Touch the edges tightly together but do not overlap the canvases. Treat the joints with a roller carefully.
Avoid getting paste on the front side of the photo murals. In case it's happened, simply wash off the excess adhesive with a wet sponge avoiding too much friction.